Operation instructions
1.Turn on the product,the blue light turns on and the product enters the energy-saving mode,start to generate ozone and the fan dose not work,after working for half an hour(±3 minutes),the product enters the standby mode,the blue light flashes(every 3 seconds for a cycle), and after 55 minutes(±5 minutes) later,the products starts to work again,the blue light is on for 5 minutes(±1 minute),and then the product enters standby mode again.Press the button again to enter the boost mode(green light on),ozone,fans will keep working.Press the button again to turn off the product.

2.When the product is connected to USB interface under energy-saving mode,red light is on.Product will not work under charging mode.Red led will be off when it is fully charged.

3.When the product is plugged into the charging port in boost mode,the product continues to work.The green and red lights are switched once every 3 seconds and when full charged,the green light will be on.Press the button to turn off the product.

4.Connect the charger to USB interface to charge the product under turn-off mode, the product is in the charging state. Pressing the button with no effect and the red light is on.When fully charged,the red light will be off.

Technical Spec Name:Air purifier
Input:5.0V-0.48A
Power:3.7v-0.06A
Noise:35dB(A)
Ozone output:≤2mg/h
Battery capacity:1200mAh