Door edge guard clear door guards for cars Car door edge guards Door\r\n Specifications：\r\n Item：Car Door Edge Guards\r\n Material: rubber\r\n Colour: Clear\r\n Length: 5M\r\n Width: 10mm\r\n Rim thickness: 7 mm\r\n Taking a range of 1.0mm to 2.5mm\r\n Installation location:\r\n 1.The metal edge of the main body between the car door and the vehicle body.\r\n 2.In the car door and more of the outer edge.\r\n 3.In the window above the car.\r\n 4.Window panel minibus.\r\n 5.Border heavy equipment.\r\n 6.Covering the edge of the sharp metal.\r\n 7.Vinyl window decoration boat.\r\n How to install:\r\n 1.Clean the door edge to remove any oil, wax & dust. Make sure the door is dry before continuing.\r\n 2.Uncover the tape from the tip of the lining (Ensure the tape is install inside the door).\r\n 3.Start from the top, insert the lining onto your door edge until the lining is fully seated.\r\n 4.Press the lining with your thumb along the door edge until it is fully seated.\r\n 5.Repeat step 4 until all edges are protected.\r\n 6.Use scissors to cut away unused lining for other door edges.\r\n 7.Let the lining dry up by itself and do not get wet for at least 12 hours.\r\n Package Included:\r\n 1x 5M Rubber Edge Trim Installation length advice:\r\n Car:\r\n5M: vertical installation of 4 doors of a car.\r\n10M: the vertical side of the four doors of a car + the horizontal side of the bottom The installation.\r\n15M: the vertical side of the four doors of a car plus the horizontal side of the bottom Install the bottom side of the trunk.\r\n Suvs :\r\n 5M: 4 doors of a car.\r\n10M: 4 doors + trunk installation for a car.\r\n15M: the four doors of a car + trunk + hood The installation.