Not everyone can afford high tech hearing aids. This set of amplifiers by #iAid helps those with some hearing loss hear much clearer. FDA approved you can be assured that it is saf...
Read full review
Digital Hearing Amplifier Aid 2 Pack - FDA Approved Personal Sound Device with Batteries, 4 Channels Noise Reduction, Hearing Aid Cleaning Kit for Adults and Seniors by iAid
See current price on Amazon. As an Amazon Associate, Juicer.Deals earns from qualifying purchases.
Description
Frequently Asked Questions
Problem 1
If the iAid amplifier is not working correctly
Solution
1.Make sure it is turned ON.
2.When using Zinc Air batteries, adhesive tab must be removed and Battery must sit for a full minute prior to first use.
3.Check that the Battery Compartment is completely closed.
4.Increase the volume slowly until you hear things comfortably.
5.Make sure Battery is correctly inserted. If the unit is still not working, try a new Battery.
Problem 2
If the amplifier works, but the volume is too low or too loud
Solution
1.Try adjusting volume. If you find it too loud, lower the volume. If it is too low, increase the volume.
2.Try switching to another listening Mode.
3.If the volume is still too low, try a new Battery as it may need replacement.
4.If the volume is still too loud, your hearing may be too sensitive for iAid. You may reach out to us and arrange a return and refund.
5.Check the Earpiece for blockage. Ensure the opening of the Tip and Stem of Earpiece are clean.
6.Consult your doctor or audiologist.
Problem 3
For whistling sounds
Solution
1.Decrease volume. Always begin with volume at the lowest point. Increase volume one click at a time, at a slow pace, until you find it most comfortable.
2.Be sure Earpiece is clean and inserted securely.
Problem 4
If there is a disturbing noise in the background that will not go away
Solution
1.Be sure you have allowed yourself to become acclimated to your iAid by using it in small increments and slowly increasing your usage time. It is important to get used to both sounds you are focusing on and background noise, as well.
2.Adjust Mode and Volume settings to help acclimate. If the sound is still disconcerting, you may be too sensitive for iAid. You may reach out to us and arrange a return and refund.
Problem 1
If the iAid amplifier is not working correctly
Solution
1.Make sure it is turned ON.
2.When using Zinc Air batteries, adhesive tab must be removed and Battery must sit for a full minute prior to first use.
3.Check that the Battery Compartment is completely closed.
4.Increase the volume slowly until you hear things comfortably.
5.Make sure Battery is correctly inserted. If the unit is still not working, try a new Battery.
Problem 2
If the amplifier works, but the volume is too low or too loud
Solution
1.Try adjusting volume. If you find it too loud, lower the volume. If it is too low, increase the volume.
2.Try switching to another listening Mode.
3.If the volume is still too low, try a new Battery as it may need replacement.
4.If the volume is still too loud, your hearing may be too sensitive for iAid. You may reach out to us and arrange a return and refund.
5.Check the Earpiece for blockage. Ensure the opening of the Tip and Stem of Earpiece are clean.
6.Consult your doctor or audiologist.
Problem 3
For whistling sounds
Solution
1.Decrease volume. Always begin with volume at the lowest point. Increase volume one click at a time, at a slow pace, until you find it most comfortable.
2.Be sure Earpiece is clean and inserted securely.
Problem 4
If there is a disturbing noise in the background that will not go away
Solution
1.Be sure you have allowed yourself to become acclimated to your iAid by using it in small increments and slowly increasing your usage time. It is important to get used to both sounds you are focusing on and background noise, as well.
2.Adjust Mode and Volume settings to help acclimate. If the sound is still disconcerting, you may be too sensitive for iAid. You may reach out to us and arrange a return and refund.
