Specifications:

Material: Light aluminum alloy electronic components

Model: Double sense type (light sense, shock)

Color: Colorful

Independent circuit design: Consisting of light control circuit, dynamic induction circuit, and light-emitting circuit

Suitable Models: Universal type, cars, motorcycles, electric cars, bicycles.

Installation Site: Vehicle valve

Applicable Valve: Suitable for schrader valve, american valve and dunlop valve, woods valve, english valve available. But presta valve、sclaverand valve or french valve unavailable.

Package Included:

2 x Bike Tire Wheel LED Lights

6 x AG10 Button Battery

2 x English Valve Adapters

Install Attention:

① When installing the battery, be sure to turn the battery down (the side with the word is the positive). Be sure to put the battery inside the black insulation holster, do not expose it, otherwise, the short circuit between the battery and the metal of the lamp housing will cause the battery to discharge heat and It will drain the power in a few minutes.

② After the battery is placed, be careful when twisting the lamp head. Make sure that the spring in the notch on the side of the lamp head is in good contact with the metal base (for example, if the spring is too far inside, you can pull it out manually, but it must be light! ), when twisting the lamp head, the screw must be aligned, the lamp head and the lamp shell are balanced, don\'t harden, otherwise it is easy to cause the buckle. In order to avoid the screw buckle falling off, try not to unscrew it multiple times.

Must Note Before Buying:

1. It will light up when it is just installed on the electronics, and it will not light up afterwards!

2. In the evening or in the case of low light, it will be bright when it is shaken, and it will light for 15-20 seconds each time.